View AT-41532-BLK_150435.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

AT-41532
3-Lead SC-70 (SOT-323) Surface Mount Plastic Package
Pin Configuration
COLLECTOR
41Y
BASE EMITTER
AT-41532 Absolute Maximum Ratings
Symbol VEBO VCBO VCEO IC PT Tj TSTG Parameter Emitter-Base Voltage Collector-Base Voltage Collector-Emitter Voltage Collector Current Power Dissipation[2,3] Junction Temperature Storage Temperature Units V V V mA mW C C Absolute Maximum[1] 1.5 20 12 50 225 150 -65 to 150 Thermal Resistance:[2] jc = 350C/W
Electrical Specifications, TA = 25C
Symbol hFE ICBO IEBO Parameters and Test Conditions Forward Current Transfer Ratio Collector Cutoff Current Emitter Cutoff Current VCE = 5 V IC = 5 mA VCB = 3 V VEB = 1 V Units mA mA Min 30 Typ 150 Max 270 0.2 1.0
Characterization Information, TA = 25C
Symbol NF Parameters and Test Conditions Noise Figure VCE = 5 V, IC = 5 mA GA Associated Gain VCE = 5 V, IC = 5 mA P1dB G1dB IP3 |S21E|2 Power at 1 dB Gain Compression (opt tuning) VCE = 5 V, IC = 25 mA Gain at 1 dB Gain Compression (opt tuning) VCE = 5 V, IC = 25 mA Output Third Order Intercept Point, VCE = 5 V, IC =25 mA (opt tuning) Gain in 50 system; VCE = 5 V, IC = 5 mA f = 0.9 GHz f = 1.8 GHz f = 2.4 GHz f = 0.9 GHz f = 1.8 GHz f = 2.4 GHz f = 0.9 GHz f = 0.9 GHz f = 0.9 GHz f = 0.9 GHz f = 2.4 GHz Units dB Min Typ 1.0 1.4 1.9 15.5 10.5 9.0 14.5 14.5 25 12.5 13.25 5.2
dB
dBm dB dBm dB
AT-41532 Typical Performance
4.0 3.5 3.5 3.0 2 mA 5 mA 3.5 3.0 2 mA 5 mA
NOISE FIGURE (dB)
NOISE FIGURE (dB)
2.5 2.0 1.5 1.0 0.5 0
NOISE FIGURE (dB)
0 1.0 2.0 3.0 4.0
3.0 2.5 2.0 1.5 1.0 0.5 0 0 1.0 2.0 3.0 4.0 FREQUENCY (GHz)
2.5 2.0 1.5 1.0 0.5 0 0 1.0 2.0 3.0 4.0
FREQUENCY (GHz)
FREQUENCY (GHz)
Figure 1. AT-41532 Typical Noise Figure vs. Frequency at 1V, 1 mA.
Figure 2. AT-41532 Typical Noise Figure vs. Frequency and Current at 2.7V.
16 2 mA 5 mA 12
Figure 3. AT-41532 Typical Noise Figure vs. Frequency and Current at 5V.
16 2 mA 5 mA 12
GAIN (dB)
10
8
GAIN (dB)
6
GAIN (dB)
8
8
4
4 2 0 0.5 0 0.5
4
1.0
1.5
2.0
2.5
3.0
3.5
4.0
1.0
1.5
2.0
2.5
3.0
3.5
4.0
0 0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
FREQUENCY (GHz)
FREQUENCY (GHz)
FREQUENCY (GHz)
Figure 4. AT-41532 Associated Gain vs. Frequency at 1V, 1 mA.
Figure 5. AT-41532 Associated Gain vs. Frequency and Current at 2.7V.
Figure 6. AT-41532 Associated Gain vs. Frequency and Current at 5V.
20 15
9 8 7
P1 dB (dBm)
G1 dB (dB)
2.7 V 5V 0 5 10 15 20 25
10 5 0 -5 -10 COLLECTOR CURRENT (mA)
6 5 4 3 2 1 0 0 5 10 15 20 25 COLLECTOR CURRENT (mA) 2.7 V 5V
Figure 7. AT-41532 P1 dB vs. CollectorCurrent and Voltage (validup to 2.4 GHz).
Figure 8. AT-41532 G1 dB vs. CollectorCurrent and Voltage (validup to 2.4 GHz).
AT-41532 Typical Scattering Parameters, Common Emitter, Z O = 50 , VCE = 1 V, IC = 1 mA
Freq. GHz 0.5 0.75 1.0 1.5 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 Mag 0.787 0.697 0.620 0.554 0.538 0.543 0.559 0.561 0.545 0.534 0.544 0.563 0.597 0.655 0.703 S11 Ang -75 -104 -128 -166 -164 118 79 47 28 14 2 -10 -23 -34 -42 dB 8.79 7.28 5.84 3.40 1.52 -1.06 -2.61 -3.06 -2.81 -2.46 -2.38 -2.49 -2.79 -3.39 -4.03 S21 Mag 2.750 2.311 1.960 1.480 1.191 0.886 0.741 0.703 0.724 0.754 0.761 0.751 0.725 0.677 0.629 Ang 125 106 90 66 48 22 5 -7 -20 -35 -52 -68 -84 -100 -112 dB -20.18 -18.74 -18.40 -18.80 -18.69 -13.30 -8.03 -4.83 -3.11 -2.30 -2.08 -2.18 -2.52 -3.15 -3.76 S12 Mag 0.098 0.116 0.120 0.115 0.116 0.216 0.397 0.574 0.699 0.768 0.787 0.778 0.748 0.696 0.649 Ang 49 38 31 30 42 60 47 24 0 -23 -44 -63 -80 -96 -110 Mag 0.860 0.785 0.734 0.678 0.653 0.620 0.568 0.487 0.398 0.362 0.407 0.467 0.523 0.593 0.665 S22 Ang -22 -28 -32 -40 -50 -73 -102 -137 -180 130 88 58 35 16 -6
AT-41532 Typical Noise Parameters,
Freq. GHz
0.9 1.8 2.0 2.5 3.0 3.5 4.0
Common Emitter, ZO = 50 , VCE = 1 V, IC = 1 mA Fmin dB
1.4 1.8 1.9 2.2 2.6 3.1 3.6
opt Mag 0.44 0.57 0.60 0.66 0.71 0.75 0.77 Ang 92 -183 -169 -140 -116 -95 -77
20
1.50 gmax dB(S|2,1|) k 1.25 1.00 0.75 0.50 0.25 0 6
k
Rn ohms
12.4 3.0 3.3 10.1 27.6 59.9 103.0
Gassoc dB
9.4 7.6 6.7 5.7 4.6 3.5 2.1
GAIN (dB)
16 12 8 4 0 -4 0 1 2 3
gmax = maximum available gain (MAG) if k > 1 gmax = maximum stable gain (MSG) if k < 1 k = stability factor S MAG = 21 (k k2-1) S12 MSG = |S21| / |S12| k= 1 - |S11| 2 - |S22| 2 + |D|2 ; D = S 11S22 - S12 S21 2 * |S12| |S21|
4
5
FREQUENCY (GHz)
Figure 9. Gain vs. Frequency at 1 V, 1 mA. Note: dB(|S 21|) = 20 * log(|S 21|)
AT-41532 Typical Scattering Parameters, Common Emitter, Z O = 50 , VCE = 2.7 V, IC = 2 mA
Freq. GHz 0.5 0.75 1.0 1.5 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 Mag 0.647 0.532 0.455 0.394 0.382 0.397 0.434 0.474 0.497 0.501 0.512 0.532 0.569 0.643 0.687 S11 Ang -82 -111 -134 -171 160 116 80 50 30 15 4 -9 -22 -32 -40 dB 13.45 11.34 9.54 6.70 4.64 1.87 0.03 -1.20 -1.81 -1.88 -1.89 -1.99 -2.31 -2.37 -3.51 S21 Mag 4.702 3.691 3.000 2.162 1.707 1.240 1.004 0.871 0.812 0.805 0.804 0.796 0.767 0.762 0.668 Ang 119 101 88 68 51 26 5 -10 -23 -36 -51 -67 -83 -97 -112 dB -23.97 -22.60 -21.87 -20.48 -18.50 -13.56 -9.26 -6.05 -3.84 -2.40 -1.73 -1.61 -1.86 -2.41 -3.10 S12 Mag 0.063 0.074 0.081 0.095 0.119 0.210 0.344 0.498 0.643 0.759 0.819 0.831 0.808 0.758 0.700 Ang 52 46 46 52 59 61 50 32 11 -12 -34 -55 -74 -93 -107 Mag 0.808 0.737 0.696 0.658 0.643 0.627 0.604 0.556 0.470 0.377 0.361 0.411 0.476 0.562 0.639 S22 Ang -21 -24 -27 -33 -40 -59 -81 -108 -142 174 123 82 52 27 1
AT-41532 Typical Noise Parameters,
Freq. GHz
0.9 1.8 2.0 2.5 3.0 3.5 4.0
Common Emitter, ZO = 50 , VCE = 2.7 V, IC = 2 mA Fmin dB
1.2 1.6 1.7 1.9 2.2 2.5 2.9
opt Mag 0.35 0.48 0.51 0.60 0.65 0.70 0.74 Ang 100 -179 -165 -136 -112 -91 -74
Rn ohms
8.7 3.3 3.7 8.9 21.0 42.0 72.0
Gassoc dB
12.9 9.7 9.1 8.0 6.9 5.9 5.1
GAIN (dB)
20 16 12 8 4 0 -4 0 1 2 3 4 5 FREQUENCY (GHz) gmax dB(S|2,1|) k
1.2 1 0.8 0.6 0.4 0.2 0 6
gmax = maximum available gain (MAG) if k > 1 gmax = maximum stable gain (MSG) if k < 1 k = stability factor S MAG = 21 (k k2-1) S12 MSG = |S21| / |S12| k= 1 - |S11| 2 - |S22| 2 + |D|2 ; D = S 11S22 - S12 S21 2 * |S12| |S21|
Figure 10. Gain vs. Frequency at 2.7 V, 2 mA. Note: dB(|S 21|) = 20 * log(|S 21|)
k
AT-41532 Typical Scattering Parameters, Common Emitter, ZO = 50 , VCE = 2.7 V, IC = 5 mA
Freq. GHz 0.5 0.75 1.0 1.5 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 Mag 0.400 0.312 0.270 0.247 0.253 0.280 0.323 0.379 0.434 0.480 0.522 0.557 0.595 0.662 0.709 S11 Ang -102 -130 -152 175 149 112 80 55 38 24 10 -5 -19 -29 -39 dB 17.03 14.15 11.97 8.82 6.67 3.86 2.07 0.80 -0.13 -0.72 -1.20 -1.64 -2.17 -2.38 -3.56 S21 Mag 7.106 5.101 3.969 2.762 2.154 1.559 1.269 1.097 0.986 0.920 0.871 0.828 0.779 0.761 0.664 Ang 106 91 80 64 50 26 6 -12 -28 -43 -58 -72 -87 -99 -115 dB -25.97 -23.86 -22.09 -19.10 -16.60 -12.48 -9.19 -6.55 -4.50 -2.96 -2.07 -1.73 -1.86 -2.43 -3.03 S12 Mag 0.050 0.064 0.079 0.111 0.148 0.238 0.347 0.471 0.595 0.711 0.788 0.820 0.808 0.756 0.705 Ang 59 60 61 63 62 55 43 27 9 -11 -32 -53 -73 -92 -107 Mag 0.671 0.615 0.588 0.564 0.553 0.535 0.514 0.472 0.398 0.309 0.299 0.366 0.449 0.533 0.633 S22 Ang -22 -24 -25 -30 -37 -54 -75 -99 -130 -174 131 87 55 27 3
AT-41532 Typical Noise Parameters,
Freq. GHz
0.9 1.8 2.0 2.5 3.0 3.5 4.0
Common Emitter, ZO = 50 , VCE = 2.7 V, IC = 5 mA Fmin dB
1.2 1.4 1.5 1.7 1.9 2.2 2.5
opt Mag
0.283 0.41 0.44 0.53 0.60 0.67 0.71
Ang
106 -165 -151 -126 -106 -86 -69
Rn ohms
7.3 3.9 4.8 9.2 18.4 35.0 58.0
Gassoc dB
14.0 10.7 9.8 8.5 7.5 6.6 5.8
GAIN (dB)
25 20 15 10 5 gmax dB(S|2,1|) k -5 0 1 2 0
1.2 1 0.8 0.6 0.4 0.2 0 6
3
4
5
gmax = maximum available gain (MAG) if k > 1 gmax = maximum stable gain (MSG) if k < 1 k = stability factor S MAG = 21 (k k2-1) S12 MSG = |S21| / |S12| k= 1 - |S11| 2 - |S22| 2 + |D|2 ; D = S 11S22 - S12 S21 2 * |S12| |S21|
FREQUENCY (GHz)
Figure 11. Gain vs. Frequency at 2.7 V, 5 mA. Note: dB(|S 21|) = 20 * log(|S 21|)
k
AT-41532 Typical Scattering Parameters, Common Emitter, Z O = 50 , VCE = 2. 7 V, IC = 10 mA
Freq. GHz 0.5 0.75 1.0 1.5 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 Mag 0.243 0.199 0.184 0.186 0.199 0.232 0.275 0.334 0.399 0.462 0.521 0.566 0.609 0.678 0.722 S11 Ang -122 -149 -169 161 139 107 79 56 41 27 14 -2 -18 -28 -39 dB 18.39 15.19 12.88 9.64 7.44 4.61 2.84 1.60 0.66 -0.02 -0.67 -1.26 -1.88 -2.97 -3.38 S21 Mag 8.310 5.751 4.408 3.034 2.354 1.700 1.387 1.202 1.079 0.997 0.926 0.865 0.805 0.711 0.678 Ang 97 85 76 62 49 27 6 -12 -29 -45 -60 -75 -90 -101 -116 dB -26.90 -23.99 -21.74 -18.35 -15.79 -11.93 -9.00 -6.66 -4.79 -3.30 -2.34 -1.89 -1.92 -2.32 -3.02 S12 Mag 0.045 0.063 0.082 0.121 0.162 0.253 0.355 0.465 0.576 0.684 0.764 0.805 0.802 0.766 0.706
25
S22 Ang 68 69 69 67 63 52 39 24 7 -12 -32 -52 -72 -91 -106 Mag 0.586 0.552 0.536 0.520 0.510 0.491 0.467 0.424 0.349 0.261 0.251 0.328 0.422 0.485 0.620 Ang -21 -21 -23 -28 -35 -52 -72 -95 -125 -167 134 88 56 29 3
1.25
GAIN (dB)
gmax = maximum available gain (MAG) if k > 1 gmax = maximum stable gain (MSG) if k < 1 k = stability factor S MAG = 21 (k k2-1) S12 MSG = |S21| / |S12| k= 1 - |S11| 2 - |S22| 2 + |D|2 ; D = S 11S22 - S12 S21 2 * |S12| |S21|
20
1
15
0.75
k
10
0.5
gmax dB(S|2,1|) k 0 0 1 2
5
0.25
3
4
5
0 6
FREQUENCY (GHz)
Figure 12. Gain vs. Frequency at 2.7 V, 10 mA. Note: dB(|S 21|) = 20 * log(|S 21|)
AT-41532 Typical Scattering Parameters, Common Emitter, Z O = 50 , VCE = 5 V, IC = 2 mA
Freq. GHz 0.5 0.75 1.0 1.5 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 Mag 0.659 0.540 0.456 0.387 0.371 0.387 0.428 0.472 0.494 0.490 0.489 0.506 0.541 0.634 0.670 S11 Ang -79 -108 -131 -169 162 116 79 49 28 13 2 -10 -22 -33 -39 dB 13.43 11.41 9.64 6.81 4.74 1.91 0.01 -1.31 -1.96 -1.95 -1.81 -1.84 -2.07 -2.46 -3.23 S21 Mag 4.696 3.720 3.034 2.190 1.726 1.247 1.001 0.860 0.798 0.799 0.812 0.810 0.788 0.754 0.689 Ang 121 103 89 69 53 27 7 -8 -20 -33 -48 -64 -80 -94 -109 dB -25.16 -23.78 -23.06 -21.69 -19.63 -14.40 -9.89 -6.47 -4.05 -2.36 -1.51 -1.28 -1.51 -2.09 -2.75 S12 Mag 0.055 0.065 0.070 0.082 0.104 0.191 0.320 0.475 0.627 0.762 0.840 0.863 0.841 0.786 0.729 Ang 53 48 48 55 63 67 56 38 17 -5 -29 -51 -71 -90 -105 Mag 0.836 0.774 0.738 0.705 0.694 0.685 0.673 0.635 0.556 0.448 0.388 0.408 0.462 0.539 0.625 S22 Ang -18 -22 -24 -30 -37 -54 -75 -100 -131 -170 141 96 62 35 6
AT-41532 Typical Noise Parameters,
Common Emitter, ZO = 50 , 5 V, IC = 2 mA Freq. GHz
0.9 1.8 2.0 2.5 3.0 3.5 4.0
Fmin dB
1.2 1.5 1.6 1.9 2.2 2.5 2.9
opt Mag 0.35 0.48 0.51 0.60 0.65 0.70 0.74 Ang 100 178 -166 -137 -112 -92 -73
25
1.2 1 0.8 0.6 0.4 0.2 0 6 k
Rn ohms
8.5 3.4 3.7 8.8 21.7 44.6 79.5
Gassoc dB
13.5 10.6 9.7 8.8 7.8 7.1 6.0
GAIN (dB)
20 15 10 5 gmax dB(S|2,1|) k -5 0 1 2 0
3
4
5
gmax = maximum available gain (MAG) if k > 1 gmax = maximum stable gain (MSG) if k < 1 k = stability factor S MAG = 21 (k k2-1) S12 MSG = |S21| / |S12| k= 1 - |S11| 2 - |S22| 2 + |D|2 ; D = S 11S22 - S12 S21 2 * |S12| |S21|
FREQUENCY (GHz)
Figure 13. Gain vs. Frequency at 5 V, 2 mA. Note: dB(|S 21|) = 20 * log(|S 21|)
AT-41532 Typical Scattering Parameters, Common Emitter, Z O = 50 , VCE = 5 V, IC = 5 mA
Freq. GHz 0.5 0.75 1.0 1.5 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 Mag 0.402 0.304 0.255 0.225 0.227 0.256 0.301 0.359 0.414 0.457 0.496 0.531 0.573 0.633 0.696 S11 Ang -98 -124 -147 178 151 111 79 53 36 22 10 -4 -19 -28 -38 dB 17.27 14.42 12.25 9.09 6.92 4.06 2.22 0.92 -0.02 -0.60 -1.00 -1.42 -1.89 -2.40 -3.32 S21 Mag 7.303 5.260 4.095 2.848 2.218 1.596 1.291 1.111 0.997 0.933 0.891 0.849 0.805 0.759 0.682 Ang 107 92 82 65 52 28 8 -10 -26 -40 -55 -70 -85 -95 -113 dB -27.15 -25.04 -23.26 -20.23 -17.66 -13.38 -9.92 -7.07 -4.78 -2.97 -1.84 -1.37 -1.44 -2.03 -2.63 S12 Mag 0.044 0.056 0.069 0.097 0.131 0.214 0.319 0.443 0.577 0.711 0.809 0.854 0.847 0.792 0.739 Ang 60 61 63 66 65 59 48 33 16 -4 -26 -49 -69 -88 -105 Mag 0.713 0.663 0.640 0.621 0.613 0.603 0.592 0.562 0.498 0.401 0.344 0.374 0.441 0.516 0.624 S22 Ang -19 -21 -23 -28 -34 -51 -69 -92 -120 -156 154 105 67 38 8
AT-41532 Typical Noise Parameters,
Freq. GHz
0.9 1.8 2.0 2.5 3.0 3.5 4.0
Common Emitter, ZO = 50 , VCE = 5 V, IC = 5 mA Fmin dB
1.1 1.4 1.5 1.7 1.9 2.2 2.4
opt Mag 0.29 0.41 0.44 0.53 0.60 0.67 0.71 Ang 110 -167 -153 -127 -106 -86 -70
Rn ohms
7.0 3.9 4.7 9.3 18.6 36.8 59.5
Gassoc dB
14.8 11.3 10.5 9.3 8.4 7.5 6.7
GAIN (dB)
25 20 15 10 5 gmax dB(S|2,1|) k -5 0 1 2 0
1.2 1 0.8 0.6 0.4 0.2 0 6
3
4
5
gmax = maximum available gain (MAG) if k > 1 gmax = maximum stable gain (MSG) if k < 1 k = stability factor S MAG = 21 (k k2-1) S12 MSG = |S21| / |S12| k= 1 - |S11| 2 - |S22| 2 + |D|2 ; D = S 11S22 - S12 S21 2 * |S12| |S21|
FREQUENCY (GHz)
Figure 14. Gain vs. Frequency at 5 V, 5 mA. Note: dB(|S 21|) = 20 * log(|S 21|)
k
AT-41532 Typical Scattering Parameters, Common Emitter, Z O = 50 , VCE = 5 V, IC = 10 mA
Freq. GHz 0.5 0.75 1.0 1.5 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 11.0 12.0 Mag 0.239 0.182 0.160 0.155 0.167 0.201 0.246 0.306 0.369 0.430 0.489 0.539 0.588 0.638 0.713 S11 Ang -113 -140 -162 164 140 105 76 54 40 27 14 -1 -16 -29 -38 dB 18.69 15.51 13.20 9.95 7.75 4.87 3.05 1.79 0.86 0.23 -0.35 -0.91 -1.58 -3.09 -3.24 S21 Mag 8.601 5.966 4.571 3.144 2.440 1.751 1.421 1.229 1.105 1.027 0.961 0.900 0.834 0.701 0.689 Ang 98 86 78 63 51 29 9 -10 -26 -42 -58 -73 -88 -102 -115 dB -28.05 -25.18 -22.94 -19.50 -16.89 -12.90 -9.80 -7.24 -5.11 -3.33 -2.11 -1.49 -1.45 -1.93 -2.58 S12 Mag 0.040 0.055 0.071 0.106 0.143 0.226 0.324 0.434 0.555 0.682 0.785 0.842 0.846 0.801 0.743 Ang 69 70 71 69 66 57 45 31 14 -5 -26 -47 -68 -88 -104 Mag 0.641 0.611 0.597 0.585 0.578 0.566 0.553 0.523 0.461 0.366 0.308 0.342 0.419 0.501 0.616 S22 Ang -18 -19 -20 -26 -33 -49 -67 -88 -115 -149 161 110 70 40 9
GAIN (dB)
gmax = maximum available gain (MAG) if k > 1 gmax = maximum stable gain (MSG) if k < 1 k = stability factor S MAG = 21 (k k2-1) S12 MSG = |S21| / |S12| k= 1 - |S11| 2 - |S22| 2 + |D|2 ; D = S 11S22 - S12 S21 2 * |S12| |S21|
25
1.25
20
1
15
0.75
10
0.5
gmax dB(S|2,1|) k 0 0 1 2
5
0.25
3
4
5
0 6
FREQUENCY (GHz)
Figure 15. Gain vs. Frequency at 5 V, 10 mA. Note: dB(|S 21|) = 20 * log(|S 21|)
k
C2 INPUT Zo C1 L2
C3 L1 Q1 R6 L3 C4 R5 R1
OUTPUT Zo
C4
R2
R4 R3
C5
VCC = 5.25 V
Figure 16. Schematic Diagram.
C1,C4 10 pF chip capacitor C2 Open circuited stub - see text C3 2.7 pF chip capacitor C5 1000 pF chip capacitor L1 8 nH chip inductor (Coilcraft 1008CS-080) L2 Optional (see R1) L3 15 nH chip inductor (Coilcraft 1008CS-150) Q1 Hewlett-Packard AT-41532 Silicon Bipolar Transistor R1 10K chip resistor (may want to substitute a 180 nH chip inductor and 50 resistor for lower noise figure , better low freq stability, then readjust R2) R2 48 K chip resistor (adjust for rated Ic) R3 3.32 K chip resistor R4 3.32 K chip resistor R5 51.1 chip resistor R6 1.1K chip resistor (see text) 50 microstripline Zo
Figure 17. Component Parts List.
AT-3XX32 AT-4XX32 IN
01/98 AJW .062 FR-4
OUT
Vcc
Figure 18. 1X Artwork showing Component Placement.
16
1.6 1.5
0 -2
14
NOISE FIGURE (dB)
RETURN LOSS (dB)
GAIN (dB)
1.4 1.3 1.2 1.1 1 500
-4 -6 -8
12
10
-10 -12 Input Output 600 700 800 900 1000
8 6 500
600
700
800
900
1000
600
700
800
900
1000
-14 500
FREQUENCY (MHz)
FREQUENCY (MHz)
FREQUENCY (MHz)
Figure 19. Gain vs Frequency.
Figure 20. Noise Figure vs Frequency.
Figure 21. Input/Output Return Loss.
Ordering Information
Part Number AT-41532-BLK AT-41532-TR1 Increment 100 3000 Comments Bulk 7" Reel
Package Dimensions
Outline SOT-323 (SC-70 3 Lead)
2.20 (0.087) 1.80 (0.071) 0.650 BSC (0.026)
PACKAGE MARKING CODE & DATE CODE
2.20 (0.087) 2.00 (0.079)
XXY
1.35 (0.053) 1.15 (0.045)
1.30 (0.051) REF.
0.425 (0.017) TYP.
0.10 (0.004) 0.00 (0.00)
0.30 REF.
0.25 (0.010) 0.15 (0.006)
1.00 (0.039) 0.80 (0.031)
10
0.30 (0.012) 0.10 (0.004)
0.20 (0.008) 0.10 (0.004)
DIMENSIONS ARE IN MILLIMETERS (INCHES)
Tape Dimensions and Device Orientation, continued
For Outline SOT-323 (SC-70 3 Lead)
A0 A1
8 MAX.
K1
t1 (CARRIER TAPE THICKNESS) P2 P0
D
Tt (COVER TAPE THICKNESS)
E F C P D1 K0
SIZE (INCHES)
8 MAX. W B1 B0
DESCRIPTION CAVITY LENGTH WIDTH DEPTH PITCH BOTTOM HOLE DIAMETER PERFORATION DIAMETER PITCH POSITION CARRIER TAPE WIDTH THICKNESS COVER TAPE WIDTH TAPE THICKNESS DISTANCE CAVITY TO PERFORATION (WIDTH DIRECTION) CAVITY TO PERFORATION (LENGTH DIRECTION)
SYMBOL A0 A1 B0 B1 K0 K1 P D1 D P0 E W t1 C Tt F P2
SIZE (MM)
2.41 0.10 0.095 0.004 0.99 0.039 2.41 0.10 0.095 0.004 1.91 0.075 1.19 0.10 0.047 0.004 0.05 0.020 3.99 0.10 0.157 0.004 0.99 0.25 0.039 0.010 1.55 0.05 0.061 0.002 3.99 0.10 0.157 0.004 1.75 0.10 0.069 0.004 0.315 0.012 8.00 0.30 0.254 0.013 0.010 0.0005 5.21 0.10 0.205 0.004 0.063 0.001 0.0025 0.00004 3.51 0.05 0.138 0.002 2.01 0.05 0.079 0.002

▲Up To Search▲

Price & Availability of AT-41532-BLK

	To Download AT-41532-BLK Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .